Our goal was to create a piece that would allow the grabber to rest somewhere on the white board. We decided to make a hook, of which we would make two of. The hook would sit on top and over the back of the white board. On the back, the hook would extend 7 centimeters down to ensure that it does not come off. On the front of the board, the hook would extend 6 centimeters down and would have a 2 x 2 centimeter hook for the body of the grabber to rest. There would be two hooks, one hooked on the top of the white board and the other hooked about a foot and a half away. These would allow for the grabber to rest horizontally on the two hooks. We decided to choose this design so that the grabber could be placed on the hooks with ease and it would also not be a challenge to remove the grabber from the hooks. Also with this design, the grabber is not blocking or interfering with the white board in any way, as it mainly covers only the rim of the board. Here is an example of the hook that will be used in creating the grabber’s residence: