Our groups project was to design something to hold the grabber with. After coming up with a few designs we finalized the hook idea. The hook idea is where two hooks, as seen in the picture, are placed on top of the white board. The grabber can be easily placed on to the hooker. We wanted a simple design that would work well. Our design allows the grabber to rest on the hooks with ease. 
Tag Archives: Grabber
The Grabber’s Residence
Our goal was to create a piece that would allow the grabber to rest somewhere on the white board. We decided to make a hook, of which we would make two of. The hook would sit on top and over the back of the white board. On the back, the hook would extend 7 centimeters down to ensure that it does not come off. On the front of the board, the hook would extend 6 centimeters down and would have a 2 x 2 centimeter hook for the body of the grabber to rest. There would be two hooks, one hooked on the top of the white board and the other hooked about a foot and a half away. These would allow for the grabber to rest horizontally on the two hooks. We decided to choose this design so that the grabber could be placed on the hooks with ease and it would also not be a challenge to remove the grabber from the hooks. Also with this design, the grabber is not blocking or interfering with the white board in any way, as it mainly covers only the rim of the board. Here is an example of the hook that will be used in creating the grabber’s residence:
Grabber Holder Design Process
Our group worked together to make a holder that would sit on the whiteboard for the grabber. We went through the process of brainstorming 4 designs before we chose the design below. This design is a double sided hook that would enable the grabber to be stored while either side of the white board is in use.